Ford Diesel Power

You can’t buy better protection for your hard-working diesel truck than AMSOIL synthetic motor oil. Whether you want the fuel economy benefits and ultra-cold temperature protection of a diesel-formulated 5W-30 or the tried-and-true protection of a 15W-40, you just can’t beat AMSOIL synthetic motor oils.

Shear Study

AMSOIL Synthetic Diesel Oil

  • Model year 2007 and newer diesel engines are required to use API CJ-4 emission quality diesel oil.
    5W-40 (DEO) Premium API CJ-4 Synthetic Oil
    15W-40 (DME) Premium API CJ-4 Synthetic Oil
  • Model year 2007 and Older diesel engines can use any of these diesel oil.
    5W-40 (DEO) and 15W-40 (DME) Premium API CJ-4 Synthetic Oil
    5W-30 (HDD) Series 3000 Synthetic Oil
    15W-40 Heavy Duty Diesel and Marine Motor Oil (AME)

    10W-30/SAE 30 Heavy Duty Diesel Oil (ACD)

AMSOIL Premium Diesel Oils

AMSOIL Premium API CJ-4 Synthetic 5W-40 (DEO) and 15W-40 (DME) Diesel Oils are formulated for optimum performance in pre- and post-2007 diesel engines. ( See API classification system Info) toTheir low sulfated-ash formula promotes long diesel particulate filter life. AMSOIL Premium Diesel Oils are engineered with heavy duty detergent/dispersant additives and  a high 10.4 TBN to neutralize acids and control soot-thickening from EGR and blow-by and protect against corrosion, wear and varnish/sludge deposits. AMSOIL Premium CJ-4 Diesel Oils reduce operating costs and environmental impact through improved fuel efficiency and extended drain intervals.

AMSOIL Series 3000 Synthetic 5W-30 Heavy Duty Diesel Oil

AMSOIL Series 3000 100% Synthetic 5W-30 Diesel Oil (HDD) delivers extraordinary lubrication in both diesel and gasoline engines found in commercial, fleet and personal vehicles. By combining the industry’s premier synthetic technology with AMSOIL premium additives, AMSOIL Series 3000 exceeds the higher performance demands of diesel engines. It withstands the stress of higher heat, higher acid levels and excessive soot-loading found in EGR-equipped engines. AMSOIL Series 3000 Synthetic 5W-30 Diesel Oil outperforms competitive conventional and synthetic diesel oils for long-lasting performance and protection.

AMSOIL Heavy Duty 15W-40 Oils

AMSOIL Synthetic 15W-40 Heavy Duty Diesel and Marine Motor Oil (AME) and AMSOIL Synthetic Blend 15W-40 Motor Oil (PCO) have been put to the test over millions of miles in heavy-duty trucks. They are proven to provide maximum engine protection, even when they are used much longer than conventional diesel oils are used. Numerous tests have proven that AMSOIL motor oils maintains their protective TBN and viscosity while petroleum products rapidly lose both. More to the point, AMSOIL motor oils help keep engine wear rates low, an important factor in ensuring long engine life.

Service Life
AMSOIL Premium API CJ-4 Synthetic 5W-40 Diesel Oil (DEO),15W-40 Diesel Oil (DME), 15W-40 Heavy Duty Diesel and Marine Motor Oil (AME), 5W-30 Heavy Duty Diesel Oil (HDD), is recommended for extended drain intervals in engines that are unmodified and in good operating condition:

Diesel Engine Service

  • Three times (3X) OEM* recommendation, not to exceed 50,000 miles/600 hours or one year, whichever comes first. Drain intervals may be extended further with oil analysis.
  • 2007-2010 Ford 6.4L, LMM light duty diesel pickups must follow OEM drain interval. Drain intervals can be extended further with oil analysis.
  • 2011 Ford 6.7L, LMM light duty diesel pickups must follow OEM drain interval. Drain intervals can be extended further with oil analysis.

*Operating conditions and drain intervals for normal and severe service are defined by the OEM. Refer to your owner’s manual.

Note: Extended drain intervals are not recommended when using biofuels containing >10% ethanol or 5% biodiesel (B5). Follow OEM drain intervals or extend drain intervals with oil analysis.

Filters

AMSOIL Ea Oil Filters

AMSOIL Ea Oil Filters (EaO) rank among the most efficient filters in the industry. Ea Oil Filters provide a filtering efficiency in accordance with industry standard ISO 4548-12 of 98.7 percent at 15 microns and 50 percent at 7 microns. Ea Oil Filters are guaranteed for 25,000 miles or one year, whichever comes first.

AMSOIL Ea Air Filters

AMSOIL Ea Air Filters (EaA) also rank among the most efficient filters available to the car/light truck market. Ea Air Filters’ synthetic nanofiber media removes 5 times more dust than traditional cellulose filter media alone and 50 times more dust than wet-gauze filter media. AMSOIL Ea Air Filters have a service life of 100,000 miles or four years, whichever comes first.

Donaldson Filters

Donaldson Endurance™ oil filters are made with premium advanced synthetic media technology controlling the fibers’s size, shape and diameter. The controlled media allows Donaldson Endurance oil filters to deliver both higher dirt-holding capacity and higher efficiency than conventional cellulose filters. The synthetic media also has better durability with usage. Donaldson Endurance oil filters offer extended service intervals, greater engine protection to prolong engine and equipment life, improved lubricant flow, improved cold-start performance and lower operating costs.

WIX Filters

AMSOIL offers WIX filtration products as a supplement to the AMSOIL Ea line of filters. WIX is one of the most recognized names in filtration and produces some of the best filters in the world. AMSOIL carries WIX oil, air, transmission, cabin air, fuel and racing filters .

AMSOIL EaAU Filters

AMSOIL Universal Air Induction Filters (EaAU) are designed to replace stock oil-wetted gauze or foam conical filters that are supplied with custom induction systems. AMSOIL Ea Air Induction Filters offer improved efficiency, excellent airflow and are cleanable.

Injen/AMSOIL Power-Flow Diesel Air Intake Systems

Injen/AMSOIL Power-Flow Diesel Air Intakes increase the amount of oxygen available to the engine to provide increased horsepower. Because cool air is more dense than hot air, Injen/AMSOIL Diesel Air Intakes improve combustion of fuel by capturing cooler air from the outside of the engine compartment. This leads to improved power, increased performance and can result in improved efficiency. Injen/AMSOIL Power-Flow Diesel Air Intakes feature AMSOIL Ea Air Filtration technology. Ea Air Filters provide superior protection and maximum efficiency along with long filter life.

By-Pass Filteration Systems

Dual Remote Filtration System

The Ea By-Pass Oil Filters provide the best possible filtration, protection against wear and oil degradation. Working in conjunction with  the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates  by filtering oil on a “partial-flow” basis. It draws approximately 10 percent  of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The  AMSOIL Ea Bypass Filter typically filters all the oil in the system several  times an hour, so the engine continuously receives analytically clean oil. 

AMSOIL EaBP Filters have an efficiency of 98.7 percent at two  microns. At normal operating RPMs the EaBP Filter will filter all of  the oil in a typical five quart sump in less than 10 minutes.

----- Features, Benefits and Efficiency of By-Pass Filter Systems ----- (Click to Open)

By-Pass Filtration Benefits

  • Dramatically Extended Drain Intervals
  • Improved Oil Cooling
  • Increased Filtration Capacity and Life
  • Increased Fluid System Capacity
  • Efficient Small Particle and Soot Removal
  • Significantly Extended Engine Life
  • Equipment Constantly Runs on Clean Oil
  • Increased Engine Efficiency
  • Remove Particles Less Than One Micro

Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.

Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.

Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.

Soot Removal
AMSOIL has designed a high-efficiency by-pass filter element that is also a soot removal device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. These filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.

Dual Remote Filter System

The AMSOIL Dual Remote Oil Filtration System converts an engine’s full-flow oil filter system into
a full-flow/by-pass oil filtration system by attaching an AMSOIL Full-Flow Oil Filter and AMSOIL
Spin-On By-Pass Oil Filter onto a remote mount. The Dual Remote System provides superior filtration efficiency, increased oil capacity and improved oil filtration accessibility. See the G1092 brochure for more info on the Dual Remote Filtration System.

slide JS

 

 

  • Ford Power Stroke Engines 6.9, 7.3 and 7.5
    BMK-26 Dual Remote - By-Pass & Full Flow - Mounting Kit

  • Ford Power Stroke Engines 6.9, 7.3 and 7.5 - Single Element By-Pass
    BMK-21 Single Element Spin-On By-Pass Filter - Mounting Kit

  • Ford Power Stroke Engines 6.0 and 6.4 - Single Element By-Pass
    BMK-21 Spin-On By-Pass Filter - Mounting Kit

Photo Library - By-Pass Filters Installs

Ford Power Stroke Engines 6.0L Installation Pictures (Click to Open)
Ford Power Stroke Engines 6.4L Installation Pictures (Click to Open)

By-Pass Diagram Reference Resource Library

www.diesel-pickup-oil-site.com

AMSOIL Ea Oil Filters

AMSOIL Ea Oil Full Flow Filter Element (EaO) rank among the most efficient filters in the industry. Ea Oil Filters provide a filtering efficiency in accordance with industry standard ISO 4548-12 of 98.7 percent at 15 microns and 50 percent at 7 microns. Ea Oil Filters are guaranteed for 25,000 miles or one year, whichever comes first.

EaBP Oil Filters

The Ea By-Pass Oil Filter Element (EaBP) provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea By-Pass Filter operates by filtering oil on a “partial-flow” basis. It draws approximately 10 percent of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea Bypass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

Greases

AMSOIL synthetic automotive greases are extreme-pressure-fortified NLGI #2 GC/LB products. Each offers  outstanding wear and extreme-pressure protection, load-carrying capacity, friction reduction, low-temperature pumpability,  thermal stability, storage stability, oxidation inhibition, rust and corrosion inhibition, water washout resistance and extended service life. AMSOIL Series 2000 Synthetic Racing Grease (GRG) is formulated for high temperature/high-speed applications, such as wheel bearings. Yet, its outstanding load-bearing capacity suits it for use in low-speed bearings, such as heavy-duty steering knuckles. Series 2000 Synthetic Racing Grease offers the load-bearing capacity of a heavy-duty grease without sacrificing the high temperature protection of a multi-purpose.

AMSOIL Synthetic Multi-Purpose Grease (GLC) is formulated for high-speed/high-temperature applications, such as wheel bearings. AMSOIL Synthetic Multi-Purpose Grease is also available in a convenient spray formulation. (GLC-SC) AMSOIL Synthetic Heavy Duty Grease (GHD) is formulated for low-speed/high-load applications, such as ball joints, steering joints and universal joints. It is a moly fortified grease to handle extreme load situations. AMSOIL Synthetic Water Resistant Grease (GWR) is formulated for applications with frequent water exposure, such as boat trailer and tow vehicle wheel bearings.

Gear Oils

AMSOIL synthetic gear lubes deliver maximum power and protect hard-working drivetrains. Synthetics Lubricants deliver maximum power because their molecular structure is designed to reduce friction. They actually reduce high lube temperatures, and outlast ordinary gear lubes. AMSOIL Severe Gear® Synthetic EP Gear Lubes are specifically engineered for high-demand applications. Superior film strength combined with extra additives protects gears and bearings from scoring and wear. Severe Gear resists high heat and has excellent cold flow properties.

Transmission Fluid

AMSOIL synthetic transmission fluids deliver maximum power and protection to hard-working drivetrains. Synthetics Lubricants deliver maximum power because their molecular structure are designed to reduce friction. They protect best, even in temperatures that gel or fry conventional lubes. Protection in extreme temperatures is critical, given the incredible drivetrain heat generated by heavy-load operations and the temperature extremes in which diesels often work. AMSOIL transmission fluids and gear lubes provide easy, dependable cold temperature shifting in a fraction of the time required by conventional fluids.

Fuel Additives

Diesel fuel quality varies. Bad fuel fouls injectors, accelerates injector  pump wear, makes for rough running, impedes starting and causes cold-temperature stalling. You can’t be certain of the quality you’re getting at the pump. With AMSOIL diesel fuel additives, however, you can be certain that the fuel in your tank is the best it can be.

AMSOIL Diesel Concentrate

AMSOIL Diesel Concentrate (ADF) is a total system cleaner and lubricity improver for all types of diesel engines. AMSOIL Diesel Concentrate compensates for the quality variances of different fuels (including biodiesels) and the deficiencies of today’s ultra-low-sulfur diesel (ULSD) fuel for better engine operation. It reduces cylinder wear, retains TBN longer, minimizes soot-loading and acts as a fuel stabilizer. AMSOIL Diesel Concentrate restores horsepower to like-new levels and improves fuel economy by up to five percent.

AMSOIL Cold Flow Improver

AMSOIL Cold Flow Improver (ACF) for diesel fuel is designed for use in ULSD, yet works well with conventional fuels. It functions by modifying wax crystal formation at low temperatures to depress the pour point and improve cold-flow filtration properties. AMSOIL Cold Flow Improver contains jet-fuel-type deicer to help prevent ice formation in fuels contaminated with water.

Diesel Recovery

AMSOIL Diesel Recovery is an emergency diesel fuel treatment that dissolves the wax crystals that form when diesel fuel has surpassed its cloud point. It liquifies gelled diesel fuel and thaws frozen fuel filters, often negating the need for a new filter.

Diesel Concentrate Plus Cold Flow Improver

Diesel Concentrate Plus Cold Flow Improver (DFC) provides all the benefits of Diesel Concentrate and Cold Flow Improver in one convenient bottle. It improves the performance, fuel efficiency and longevity of diesel engines while reducing deposits, black smoke and emissions. AMSOIL Diesel Concentrate Plus Cold Flow Improver lowers the cold filter-plugging point by as much as 34°F and reduces the need for #1 diesel fuel that is diluted with kerosene.

AMSOIL Cetane Boost

North American diesel fuel is notoriously cetane-deficient. Often, the performance problems drivers blame on their diesel engines, like rough running and a lack of power, are actually caused by cetane-deficient diesel fuel. Instead of igniting smoothly, low-cetane fuel explodes, sending shock waves through the combustion chamber and throughout the engine. AMSOIL Cetane Boost (ACB) raises cetane three to seven numbers, helping engines start dependably and run smoothly and powerfully – just the way diesels should run. AMSOIL diesel fuel additives are alcohol-free for seal protection. AMSOIL diesel fuel additives may be mixed during fueling.